Components & Equipment Manufacturers
Your benefits at a glance
- We help our clients gain a competitive edge and highlight key quality aspects of their equipment or machinery as distinctive unique selling points.
- We have international and local experts in all key markets worldwide.
- We provide industry-specific know-how and an internationally recognised quality mark.
- With TÜV SÜD, you receive a certificate from a recognised testing body confirming the safety of your machinery or equipment.
- We will help you achieve reliable operational efficiency.
- Avoid expensive reworking, faults and downtime through identification of faults or potential failures at an early stage.
Solutions that add value to your organisation
Component and equipment manufacturers and suppliers face a common challenge. To launch a product or access new markets, you need to comply with all the appropriate standards and directives. Our solutions covers component and equipment such as packaging systems, heat chambers, bio-compressors, scissor lift systems, LCD conveyor systems, x-ray inspection systems, warehouse conveyor systems etc.
By partnering with TÜV SÜD, you can be sure you are working with an expert in the field of quality and safety, well-versed in compliance requirements and updates. We test, inspect and certify to national and international standards.
Consistently safe, high-quality, first-class components can have a dramatic impact on your bottom line. The equation is simple. Lower supply chain costs plus reduced reworking equate to a faster route to profitability.
Our services at a glance
We provide certified quality management, technical skills, and management techniques training programmes including:
Safety training courses
- EN standards - Mechanical
- EN standards - Electrical
- CE marking
- PUWER 98
- Control integrity training
- Pressure Equipment Directive
- Machinery safety
Quality management
- Quality control (Kaizen, 5S, Six Sigma)
- Internal auditor training and lead auditor training
- Quality awareness
- Lab set-up training e.g. ISO 17025
- Testing and inspection for staff
- New standards and legislation
Management techniques
- Lean management; time management; communication skills and behavioral programmes
- Consumer programmes
- Customised training unique to your needs
TÜV SÜD experts will assist you in meeting your company set objectives or guide you toward achieving your chosen certification
- Failure analysis
- Hazards and risk analysis
- Opinions on remedies and corrective actions
- Identifying applicable Directives and Standards
TÜV SÜD conducts machinery testing, mostly based on the development documentation, on-site assessments (audits, inspections), resulting in a Technical Report
- Accessories testing
- Cable testing
- Electro Sensitive Protective Equipment (ESPE) testing
- EMC Directive
- Environmental simulation
- Highly Accelerated Life Tests (HALT/HASS)
- Low Voltage Directive
- Machinery Directive
- Materials testing
- Preliminary assessment and testing
- PUWER assessments
- Quality and performance testing
- SEMI Evaluations
- SEMI S2 assessment services
- Software escrow
- Switchgear testing
As independent third party certifiers, we liaise with the European Competent Body for the issuance of certificate of conformance and can provide you with a basis for protection from product liability issues, while ensuring confidence in your products through certified endorsements.
- TÜV SÜD Certification Mark
- CE Marking
- NRTL Mark
- ATEX Directive
- US Field and Canada Special Inspections
- IECEx international certification scheme
- Inspection of equipment and components
- ISO 9001 - Quality management system
- ISO 14001 - Environmental management system
- ISO 27001 - Information security management system
- ISO 50001 - Energy management system
We provide certified quality management, technical skills, and management techniques training programmes including:
Safety training courses
- EN standards - Mechanical
- EN standards - Electrical
- CE marking
- PUWER 98
- Control integrity training
- Pressure Equipment Directive
- Machinery safety
Quality management
- Quality control (Kaizen, 5S, Six Sigma)
- Internal auditor training and lead auditor training
- Quality awareness
- Lab set-up training e.g. ISO 17025
- Testing and inspection for staff
- New standards and legislation
Management techniques
- Lean management; time management; communication skills and behavioral programmes
- Consumer programmes
- Customised training unique to your needs
TÜV SÜD experts will assist you in meeting your company set objectives or guide you toward achieving your chosen certification
- Failure analysis
- Hazards and risk analysis
- Opinions on remedies and corrective actions
- Identifying applicable Directives and Standards
TÜV SÜD conducts machinery testing, mostly based on the development documentation, on-site assessments (audits, inspections), resulting in a Technical Report
- Accessories testing
- Cable testing
- Electro Sensitive Protective Equipment (ESPE) testing
- EMC Directive
- Environmental simulation
- Highly Accelerated Life Tests (HALT/HASS)
- Low Voltage Directive
- Machinery Directive
- Materials testing
- Preliminary assessment and testing
- PUWER assessments
- Quality and performance testing
- SEMI Evaluations
- SEMI S2 assessment services
- Software escrow
- Switchgear testing
As independent third party certifiers, we liaise with the European Competent Body for the issuance of certificate of conformance and can provide you with a basis for protection from product liability issues, while ensuring confidence in your products through certified endorsements.
- TÜV SÜD Certification Mark
- CE Marking
- NRTL Mark
- ATEX Directive
- US Field and Canada Special Inspections
- IECEx international certification scheme
- Inspection of equipment and components
- ISO 9001 - Quality management system
- ISO 14001 - Environmental management system
- ISO 27001 - Information security management system
- ISO 50001 - Energy management system